LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Hydraulic Brake System) >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Brake Fluid Level Sensor
    GM440859Courtesy of GENERAL MOTORS CORP.
  1. Align the brake fluid level sensor to the master cylinder reservoir.
  2. Press the brake fluid level sensor into the master cylinder reservoir.
  3. Connect the electrical connector to the brake fluid level sensor.
scientia non olet · About LEMON Manuals