Installation Procedure
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Install the drain hoses up through the inner wheel house to the windshield pillars.
- Tape the front drain hoses into position on the windshield pillars.
- Install the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement
.IMPORTANT: When installing the new drain hose tie wraps, position the tie wraps in order to maintain clearance between the tie wraps and the headliner.
- Secure the drain hoses to the sunroof module assembly drain spouts with new tie wraps.
- Install the interior moldings. Refer to Windshield Pillar Garnish Molding Replacement .
- Install the headliner. Refer to Headlining Trim Panel Replacement .