LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Seat Heating System And Seat Cooling System) >> Diagnostic Information and Procedures >> Scan Tool Data List

Scan Tool Data List

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

The scan tool data list contains all heated seat system related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The column, Data List, indicates the location of the parameter within the scan tool menu selections.

The typical data values are obtained from a properly operating vehicle under the conditions specified in the second row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.

Driver Position Module

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON/Engine OFF 
Base Model Part Number Module ID Information Numeric Varies
Calibration Part Number Module ID Information Numeric Varies
Driver Seat HVC Level Seat 1 HVC Data High/Medium/Low High
Driver Seat HVC Mode Seat 1 HVC Data Off/Back & Cushion/Back Only/Cool Off
End Model Part Number Module ID Information Numeric Varies
Passenger Seat HVC Level Seat 2 HVC Data High/Medium/Low High
Passenger Seat HVC Mode Seat 2 HVC Data Off/Back & Cushion/Back Only/Cool Off
Software Part Number Module ID Information Numeric Varies
Door Module(s)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON/Engine OFF 
Seat Back Heat Mode Ind. Cmd. Outputs Off/On Off
Seat Back Heat Mode Sw. Inputs Inactive/Active Inactive
Seat Cool Mode Ind. Cmd Outputs Off/On Off
Seat Cool Mode Switch Inputs Inactive/Active Inactive
Seat Heat High Ind. Cmd. Outputs Off/On Off
Seat Heat Low Ind. Cmd. Outputs Off/On Off
Seat Heat Medium Ind. Cmd. Outputs Off/On OFF
Seat Heat Mode Cmd. Outputs Off/On Off
Seat Heat Mode Sw. Inputs Inactive/Active Inactive
Rear Heated Seat Module

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON/Engine OFF 
Base Model Part Number Module ID Information Numeric Varies
Calibration Part Number Module ID Information Numeric Varies
End Model Part Number Module ID Information Numeric Varies
Seat Back Heat Control Seat 1 Outputs High/Medium/Low Off
Seat Back Heat Control Seat 2 Outputs High/Medium/Low Off
Seat Back Heat Mode Ind. Cmd. Seat 1 Outputs Off/On Off
Seat Back Heat Mode Ind. Cmd. Seat 2 Outputs Off/On Off
Seat Back Heat Mode Sw. Seat 1 Inputs Inactive/Active Inactive
Seat Back Heat Mode Sw. Seat 2 Inputs Inactive/Active Inactive
Seat Cushion Heat Control Seat 1 Outputs High/Medium/Low Off
Seat Cushion Heat Control Seat 2 Outputs High/Medium/Low Off
Seat Heat High Ind. Cmd. Seat 1 Outputs Off/On Off
Seat Heat High Ind. Cmd. Seat 2 Outputs Off/On Off
Seat Heat Low Ind. Cmd. Seat 1 Outputs Off/On Off
Seat Heat Low Ind. Cmd. Seat 2 Outputs Off/On Off
Seat Heat Medium Ind. Cmd. Seat 1 Outputs Off/On Off
Seat Heat Medium Ind. Cmd. Seat 2 Outputs Off/On Off
Seat Heat Mode Cmd. Seat 1 Outputs Off/On Off
Seat Heat Mode Cmd. Seat 2 Outputs Off/On Off
Seat Heat Mode Sw. Seat 1 Inputs Inactive/Active Inactive
Seat Heat Mode Sw. Seat 2 Inputs Inactive/Active Inactive
Seat Heat Power Seat 1 Outputs Off/On Off
Seat Heat Power Seat 2 Outputs Off/On Off
Software Part Number Module ID Information Numeric Varies