LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Seat Heating System And Seat Cooling System) >> Diagnostic Information and Procedures >> DTC B2425 or B2430 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

B2425/B2430 04 

The module does not detect a temperature change for up to 210 seconds.

B2425/B2430 0A 

The module detects that the set point temperature has not been reached fro up to 8.5 minutes.

B2425/B2430 0B 

By measuring the current and voltage output to the seat cushion heating element every 10 seconds, the rear heated seat module calculates that the heating element resistance is below the minimum resistance value of 5.4 ohms.

B2425/B2430 0C 

By measuring the current and voltage output to the seat cushion heating element every 10 seconds, the rear heated seat module calculates that the heating element resistance is above the maximum resistance value of 13.2 ohms.

B2425/B2430 1F 

The temperature sensor voltage is erratic, sudden change, or intermittent.

scientia non olet · About LEMON Manuals