LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Seat Heating System And Seat Cooling System) >> Diagnostic Information and Procedures >> DTC B111A or B1113 >> Circuit System Verification

Circuit System Verification

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, press the passenger heated seat cushion/back heat mode switch. The heated seat switch temperature indicators should illuminate and the seat should operate in the high heat mode. Press the heated seat back only mode switch. The heated seat switch temperature indicators should illuminate and the seat should operate in the back only heat mode. Press the heated seat cool mode switch. The heated seat switch temperature indicators should illuminate and the seat should operate in the cool mode.

scientia non olet · About LEMON Manuals