LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Seat Heating System And Seat Cooling System) >> Component Locator >> Heated/Cooled Seat Connector End Views >> Seat Cushion Ventilation Heat and Cool Module - Driver (KB6)

Seat Cushion Ventilation Heat and Cool Module - Driver (KB6)

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Seat Cushion Ventilation Heat and Cool Module - Driver (KB6) Connector End View
G00455568Courtesy of GENERAL MOTORS CORP.
Seat Cushion Ventilation Heat and Cool Module - Driver (KB6) Connector & Terminal Parts Information

Connector Part Information 
  • OEM: E3578-003
  • Service: See Catalog
  • Description: 8-Way M (BK)
Terminal Part Information 
  • Pins: 1, 2, 3, 4, 5, 7, 8
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Seat Cushion Ventilation Heat and Cool Module - Driver (KB6) Terminal Identification

Pin Wire Color Circuit No. Function
1 PK 7022 Driver Seat Cushion Heated/Cooled Ventilation Module Heat Control
2 D-BU 6143 Driver Seat Blower Supply Voltage
3 L-GN 6216 Driver Seat Cushion Heated/Cool Ventilation Module Cool Control
4 D-GN 6238 Driver Seat Blower Low Reference
5 OG/PK 7018 Driver Seat Cushion Temperature Sensor Signal
6 - - Not Used
7 BK/TN 6218 Driver Seat Cushion Blower Speed Control
8 OG/WH 7019 Driver Seat Cushion Temperature Sensor Low Reference
scientia non olet · About LEMON Manuals