Seat Back Ventilation Heat & Cool Module - Driver (KB6)

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Seat Back Ventilation Heat & Cool Module - Driver (KB6) Connector End Views

Courtesy of GENERAL MOTORS CORP.

Seat Back Ventilation Heat & Cool Module - Driver (KB6) Connector & Terminal Parts Information

Connector Part Information

OEM: E3575-001
Service: See Catalog
Description: 8-Way F 1.5mm Unsealed (BK)

Terminal Part Information

Pins: 1, 3
Terminal/Tray: 7116-4101-08/9
Core/Insulation Crimp: E/A
Release Tool/Test Probe: 12094430/J-35616-2A (GY)

Pins: 2, 4, 5, 7, 8
Terminal/Tray: 7116-4100-08/9
Core/Insulation Crimp: E/C
Release Tool/Test Probe: 12094430/J-35616-2A (GY)

Seat Back Ventilation Heat & Cool Module - Driver (KB6) Terminal Identification

Pin	Wire Color	Circuit No.	Function
1	PU	7023	Driver Seat Back Heated/Cool Ventilation Module Heat Control
2	D-BU	6143	Driver Seat Blower Supply Voltage
3	TN/PU	7024	Driver Seat Back Heated/Cool Ventilation Module Cool Control
4	D-GN	6238	Driver Seat Blower Low Reference
5	YE/BN	7020	Driver Seat Back Temperature Sensor Signal
6	-	-	Not Used
7	GY/PU	6211	Driver Seat Back Blower Speed Control
8	YE/WH	7021	Driver Seat Back Temperature Sensor Low Reference