Circuit/System Description

Battery positive voltage is supplied to the driver seat lumbar massage switch from the memory seat module (MSM) and to the passenger front seat from the MSM fuse. When the lumbar massage switch is pressed, battery voltage is applied through the switch contacts and the lumbar massage signal circuit to the MSM. The MSM then cycles battery voltage and ground through the lumbar vertical motor control circuits to the lumbar vertical motor for 10 minutes or until the massage function is canceled. The MSM supplies the lumbar vertical position sensor with a 5-volt reference and low reference circuits. When the motor rotates, the resistance of the potentiometer varies changing the voltage of the lumbar vertical position sensor signal to the MSM.