LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B1335 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

B1335 00 

The current out of the module does not match the current returning to the module from 1.5-5.0A.

B1335 0B 

The differential current measured through the high and low side of the power rail is within tolerance of each other, but the absolute current or an over-current has exceeded the maximum value.

B1335 42 

This DTC will set if the module calibration is not programmed.

B1335 4B 

This DTC will set if the module calibration is out of range.

scientia non olet · About LEMON Manuals