LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Seat System) >> Description and Operation >> Memory Seats Description and Operation >> Memory Recall Option

Memory Recall Option

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

The memory seat module (MSM) cannot perform memory recall functions unless the Memory Recall Option is activated. The memory recall option is located in the driver information center (DIC). The DIC reports the memory recall option setting to the MSM, as well as other receiving modules, via GMLAN message each time the ignition switch is cycled to the ON position. The MSM will then store the memory recall option setting and examine it before making a memory seat adjustment. The memory recall option setting stored within the MSM will not change until the memory recall option setting in the DIC is changed and the ignition switch is cycled to the ON position. The Easy Exit Option is also programmed this way, refer to Driver Information Center (DIC) Description and Operation .