LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Seat System) >> Description and Operation >> Lumbar Support Description and Operation (w/o Memory-A45) >> Lumbar Switch

Lumbar Switch

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

The lumbar switch provides both power and ground to the selected lumbar motors. Battery positive voltage is supplied at all times to the front passenger seat lumbar switch from the MSM/RT FRT PWR SEAT Circuit Breaker located in the rear fuse block. Battery positive voltage is supplied to both rear seat lumbar switch from the RR SEAT LUM fuse also located in the rear fuse block. Ground for the front and rear lumbar switches is supplied from the following ground stakes: