Circuit/System Verification
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the scan tool Parklamp Switch parameter while cycling the headlamp switch between the Park and Off positions. The parameter should cycle between Active and Inactive.
- If the backlighting does not turn On and OFF or remains always ON, replace the driver door switch.
- Ignition ON, command the Parking Lamps ON and OFF with a scan tool. Verify the park, license, and tail lamps turn ON and OFF between commanded states.
- If any of the parking lamps are always OFF or remain always ON, refer to the appropriate Park, License, and/or Tail Lamps Circuit Test -- Domestic or Export.
- If just the license lamps on an export vehicle are always OFF, refer to License Lamps Circuit Test -- Export