LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Lighting Systems) >> Description and Operation >> Exterior Lighting Systems Description and Operation >> Backup Lamps

Backup Lamps

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Battery voltage from the CHMSL/BCK-UP fuse located in the rear fuse block is supplied to the body control module (BCM) for backup lamp operation. When the gear selector is placed in to the REVERSE position, the powertrain control module (PCM) sends a GMLAN serial data message to the BCM indicating that the gear selector is in the reverse position. The BCM then applies battery voltage to the backup lamp supply voltage circuit illuminating the left and right backup lamps. Ground for the left backup lamp is provided at G402 and ground for the right backup lamp is provided at G403.

scientia non olet · About LEMON Manuals