LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Horn System) >> Diagnostic Information and Procedures >> Horns - Poor Tone >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the horn switch. The horn relay should click and the horn should sound as long as the horn switch is pressed.
  2. Turn ON the ignition. With a scan tool, command the BCM Horn Output. The horn relay should click and the horn should sound while commanded ON and stop sounding when commanded OFF.