LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Control System & Fuel System - 4.6L - Introduction (2 Of 2)) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Accelerator Pedal Position (APP) Sensor
    GM1671027Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Disconnect the body harness electrical connector (1) from the accelerator pedal position (APP) sensor.
    3. Fig 2: Identifying Accelerated Pedal Nuts
    GM1671028Courtesy of GENERAL MOTORS CORP.
  3. Remove the accelerated pedal nuts.
  4. Remove the accelerator pedal.
scientia non olet · About LEMON Manuals