LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Control System & Fuel System - 4.6L - Introduction (2 Of 2)) >> Component Locator >> Engine Controls Connector End Views >> Camshaft Position (CMP) Sensor

Camshaft Position (CMP) Sensor

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft Position (CMP) Sensor Connector End View
GM646415Courtesy of GENERAL MOTORS CORP.
Camshaft Position (CMP) Sensor Connector & Terminal Parts Information

Connector Part Information 
  • OEM: 15326808
  • Service: See Catalog
  • Description: 3-Way F GT 150 Series Sealed 4.5 (BK)
Terminal Part Information 
  • Terminal/Tray: See Terminal Repair Kit
  • Core/Insulation Crimp: See Terminal Repair Kit
  • Release Tool/Test Probe: See Terminal Repair Kit
Camshaft Position (CMP) Sensor Terminal Identification

Pin Wire Color Circuit No. Function
A D-BU 6259 CMP Sensor 5-Volt Reference
B BN 6266 Low Reference
C D-BU/WH 6265 CMP Sensor Signal
scientia non olet · About LEMON Manuals