LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Primary Camshaft Drive Chain Guide Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Primary Camshaft Drive Chain Guide & Bolts
    GM207533Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE .
  1. Install the primary camshaft drive chain guide (1) and retaining bolts.

    Tighten:  Tighten the primary camshaft drive chain guide bolts to 25 N.m (18 lb ft).

  2. Install the front cover. Refer to Engine Front Cover Replacement .
scientia non olet · About LEMON Manuals