LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Oil Pump Suction Pipe and Screen Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine oil pan. Refer to Oil Pan Replacement .
    2. Fig 1: Identifying Oil Pump Pickup Tube Support Nut, Oil Manifold Mounting Bolt, & Oil Pump Pickup Tube
    GM798707Courtesy of GENERAL MOTORS CORP.
  2. Remove the oil pump pickup tube support nut (3) from the main bearing stud.
  3. Remove the mounting bolt (1) from the oil manifold plate.
  4. Remove the oil pump pickup tube (2).
scientia non olet · About LEMON Manuals