LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Oil Pressure Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil filter adapter. Refer to Oil Filter Adapter Replacement .
  2. Fig 1: View of Engine Oil Pressure Switch & Electrical Connector
    GM481563Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine oil pressure switch (1) from the oil filter adapter (3).