LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Oil Level Sensor and/or Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air conditioning (A/C) compressor. Refer to Compressor Replacement .
  2. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement .
  3. Fig 1: View of Engine Oil Level Sensor & Electrical Connector
    GM551033Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector (2) from the engine oil level sensor (1).
  5. Remove the engine oil level sensor (1) from the oil pan.