LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Mount Strut Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Surge Tank
    GM1660422Courtesy of GENERAL MOTORS CORP.
  1. Remove the surge tank nuts and push pin retainer.
  2. Remove the surge tank from the studs and position the tank aside.
  3. Fig 2: View Of Engine Mount Strut Brace Bolt & Nut
    GM1660425Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine mount strut brace bolt and nut.
  5. Remove the engine mount strut brace.
  6. Fig 3: Identifying Engine Mount Strut Bolt
    GM1660428Courtesy of GENERAL MOTORS CORP.
  7. Remove the engine mount strut bolt.
  8. Remove the engine mount strut.