LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Mount Strut Bracket Replacement - Right Side >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Mount Strut Bracket & Bolts
    GM1660853Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine mount strut. Refer to Engine Mount Strut Replacement - Right Side .
  2. Remove the right front wheel and tire. Refer to Tire and Wheel Removal and Installation .
  3. Remove the engine mount strut bracket bolts (1).
  4. Remove the strut bracket nut (3).
  5. Remove the strut bracket bolt (6).
  6. Remove the strut bracket nuts (5).
  7. Remove the strut bracket bolts (2).
  8. Remove the strut bracket (4).
    9. Fig 2: Engine Mount Strut Bracket To Engine Bolts
    GM1660852Courtesy of GENERAL MOTORS CORP.
  9. Remove the engine mount strut bracket to engine bolts.
  10. Remove the engine mount strut bracket.
scientia non olet · About LEMON Manuals