LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Engine Front Mount Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front Engine Mount
    GM1660843Courtesy of GENERAL MOTORS CORP.
  1. Install the front engine mount stud through the hole in the front engine mount bracket.
  2. Install the front engine mount bracket. Refer to Engine Mount Bracket Replacement - Front .
    3. NOTE: Refer to Fastener Notice .
  3. Install the front engine mount to engine mount bracket nut.

    Tighten:  Tighten the nut to 80 N.m (59 lb ft).

  4. Install the frame. Refer to Frame Replacement - Front .
scientia non olet · About LEMON Manuals