LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Battery, Charging System And Starting System) >> Repair Instructions >> Starter Motor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying "BAT" & "S" Terminals On Starter
    GM1669932Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the intake manifold. Refer to Intake Manifold Replacement .
  3. Remove the "BAT" terminal nut (1) from the starter.
  4. Remove the "S" terminal nut (2) from the starter.
  5. Remove the starter solenoid cable from the starter.
    6. Fig 2: Locating Starter
    GM1669939Courtesy of GENERAL MOTORS CORP.
  6. Remove the starter motor bolts.
  7. Remove the starter motor.
scientia non olet · About LEMON Manuals