LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Seal Replacement - Fender to Hood >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
    2. Fig 1: Identifying Front Fender to hood Seal Retainers
    GM130516Courtesy of GENERAL MOTORS CORP.
  2. Remove the push in retainers (4) securing the front fender to hood seal (1) to the front fender (3).
  3. Remove the front fender to hood seal (1) from the front fender (3).
scientia non olet · About LEMON Manuals