LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Seal Replacement - Fender to Hood >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Front Fender to hood Seal Retainers
GM130516Courtesy of GENERAL MOTORS CORP.
  1. Install the front fender to hood seal (1) to the front fender (3).
  2. Install the push in retainers (4) in order to secure the front fender to hood seal (1) to the front fender (3).
  3. Close the hood.
scientia non olet · About LEMON Manuals