LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Rear Seal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Rear Hood Seal Flange
GM324722Courtesy of GENERAL MOTORS CORP.
  1. Install the rear hood sea (1) to the flange (2).
    2. Fig 2: View Of Rear Hood Seal & Push In Retainers
    GM457415Courtesy of GENERAL MOTORS CORP.
  2. Install the push in retainers (1) in order to secure the rear hood seal (2) to the vehicle.
  3. Close the hood.
scientia non olet · About LEMON Manuals