LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Open Assist Rod Stud Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
    CAUTION: Refer to Hood Hold Open Device Caution.
    2. Fig 1: View Of Lower Hood Assist Rod Ball Stud & Fender
    GM130509Courtesy of GENERAL MOTORS CORP.
  2. Release the clip retaining the hood assist rod to the lower hood assist rod ball stud (1).
  3. Remove the lower hood assist rod ball stud (1) from the fender (2).
    4. Fig 2: Identifying Upper Hood Assist Rod Ball Stud
    GM105286Courtesy of GENERAL MOTORS CORP.
  4. Release the clip retaining the hood assist rod to the upper hood assist rod ball stud (2).
  5. Remove the upper hood assist rod ball stud (2) from the hood (1).
scientia non olet · About LEMON Manuals