LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Open Assist Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Hood Assist Rod & Components
GM130511Courtesy of GENERAL MOTORS CORP.
  1. Press the hood assist rod (4) onto the upper hood assist rod ball stud (1).
  2. Press the hood assist rod (4) onto the lower hood assist rod ball stud (3).
  3. Ensure that both clips are fully seated on the hood assist rod (4).
  4. Close the hood.
scientia non olet · About LEMON Manuals