LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Latch Release Handle Replacement

Hood Latch Release Handle Replacement

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hood Latch Release Handle Replacement
GM1611454Courtesy of GENERAL MOTORS CORP.
Hood Latch Release Handle Replacement

Callout Component Name
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the left front lower carpet retainer. Refer to Front Carpet Retainer Replacement .
1 Hood Release Handle Screws (Qty: 2)

Tighten:  4 N.m (35 lb in)

2 Hood Release Handle