LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Hood Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Hood, Hood Insulator & Push In Retainers
GM457395Courtesy of GENERAL MOTORS CORP.
  1. Install the hood insulator (2) to the hood (1).
  2. Install the push in retainers (3) in order to secure the hood insulator (2) to the hood (1).
  3. Close the hood.
scientia non olet · About LEMON Manuals