Hood Hinge Replacement

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood Hinge Replacement

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove hood. Refer to Hood Replacement . Remove hood strut rod. Refer to Hood Open Assist Rod Replacement .
1	Bolt, Hood Hinge (Qty: 1) Tighten: 10 N.m (89 lb in)
2	Hinge, Hood

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Remove hood. Refer to Hood Replacement .
Remove hood strut rod. Refer to Hood Open Assist Rod Replacement .

Bolt, Hood Hinge (Qty: 1)

Tighten: 10 N.m (89 lb in)

Hinge, Hood