Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Front Lower Window Channel Nuts - Rear Door | 9 N.m | 80 lb in |
| Front Window Channel Nuts - Front Door | 9 N.m | 80 lb in |
| Front Window Channel Upper Screw - Front Door | 1.3 N.m | 12 lb in |
| Rear Door Stationary Window Division Post Bolt | 9 N.m | 80 lb in |
| Rear Window Channel Nuts - Front Door | 9 N.m | 80 lb in |
| Rear Lower Reveal Molding | 2 N.m | 18 lb in |
| Reveal Molding Screws - Front and Rear Door | 1.3 N.m | 12 lb in |
| Window Regulator Clamp Bolts | 9 N.m | 80 lb in |
| Window Regulator Motor Screws | 4.6 N.m | 41 lb in |
| Window Regulator Nuts | 9 N.m | 80 lb in |