LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Fixed & MOVEABLE Window Systems) >> Repair Instructions >> Windshield Side Reveal Molding Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reveal Molding
    GM1644013Courtesy of GENERAL MOTORS CORP.
  1. Starting at the bottom of the reveal molding, pull the weatherstrip (1) off of the windshield pillar flange.
  2. Pull back the rubber extension under the fender.
  3. Remove the screws (2) from the reveal molding (3).
  4. Remove the reveal molding.
scientia non olet · About LEMON Manuals