Noise Compensation Microphone (UQA)

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Noise Compensation Microphone (UQA) Connector End View

Courtesy of GENERAL MOTORS CORP.

Noise Compensation Microphone (UQA) Connector & Terminal Parts Information

Connector Part Information

OEM: 12059254
Service: 12126020
Description: 2-Way M Metri-Pack 150 Series (GN)

Terminal Part Information

Terminal/Tray: 12047581/2
Core/Insulation Crimp: E/C
Release Tool/Test Probe: 12094429/J-35616-3 (GY)

Noise Compensation Microphone (UQA) Terminal Identification

Pin	Wire Color	Circuit No.	Function
A	BK	514	Drain Wire
B	D-GN/WH	1488	Noise Reduction Microphone (+)