Conditions for Clearing the DTC

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

A current DTC will clear when the failed switch input is no longer active.
A history DTC will clear after 100 ignition cycles.

DTC B2890

Step	Action	Yes	No
Schematic Reference: Tilt/Telescoping Steering Column Schematics Connector End View Reference: Steering Wheel and Column Connector End Views ,Power Seat Connector End Views
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Calibrate the tilt/telescope soft stops. Refer to Telescoping Steering Column Calibration . Did you complete the action?	Go to Step 3	-
3	Clear the DTCs with the scan tool. Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text. Does DTC B2890 reset?	Go to Step 2	System OK