LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle >> Repair Instructions >> Locking Differential Cam Unit Disassemble

Locking Differential Cam Unit Disassemble

    Fig 1: Locking Differential Retaining Ring
    GM6343Courtesy of GENERAL MOTORS CORP.
  1. Remove the retaining ring.
    2. Fig 2: Exploded View Of Locking Differential Side Gear Cam Unit & Clutch Disc Assembly
    GM789220Courtesy of GENERAL MOTORS CORP.
  2. Disassemble the cam unit and clutch disc assembly as follows:
    1. Remove the guide clips (6).
    2. Remove the clutch discs and the splined discs (7-14).
    3. Remove the wave washer (5).
    4. Remove the fuse disc (4).
    5. Remove the carbon eared disc (3).
    6. Disassemble the cam plate (2) from the cam side gear (1).
scientia non olet · About LEMON Manuals