LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Pickup Box Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the tail/turn signal lamp wiring connectors at the rear of the vehicle.
  2. Remove the tail lamp assembly. Refer to Tail Lamp Replacement .
  3. Open the fuel filler door.
    4. Fig 1: Fuel Filler Door & Upper Screws
    GM354587Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel filler neck. Refer to Fuel Tank Filler Pipe Housing Replacement .
  5. Remove the endgate. Refer to EndGate Replacement .
    6. Fig 2: Pickup Box & Fasteners
    GM340587Courtesy of GENERAL MOTORS CORP.
  6. Remove the pickup box fasteners (1) from the frame rails.
  7. With the an assistant remove the box from the vehicle.
scientia non olet · About LEMON Manuals