LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Rear Seal Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Rear Hood Seal
    GM1313581Courtesy of GENERAL MOTORS CORP.
  1. Open the hood.
  2. Grasp the rear hood seal at each retainer and lift upwards to remove.
  3. Remove the seal from the upper cowl panel.