LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Rear Seal Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Rear Hood Seal
    GM1313581Courtesy of GENERAL MOTORS CORP.
  1. Position the seal to the upper cowl panel.
  2. Insert each retainer into the holes in the body.
  3. Close the hood.
scientia non olet · About LEMON Manuals