LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary and Secondary Latch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the grille. Refer to Grille Replacement .
    2. Fig 1: View Of Hood Latch Support
    GM1372815Courtesy of GENERAL MOTORS CORP.
  2. Using a grease pencil or other suitable marking device, mark the location of the latch on the radiator support.
  3. Remove the hood latch support (3).
  4. Remove the bolts that retain the latch to the radiator support (1).
    5. Fig 2: View Of Hood Latch Cable
    GM1372561Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the hood latch cable from the latch.
  6. Remove the latch from the vehicle.
scientia non olet · About LEMON Manuals