LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Prop Rod Bolt
    GM1313600Courtesy of GENERAL MOTORS CORP.
  1. Install the prop rod to the radiator support.
    2. NOTE: Refer to Fastener Notice .
  2. Install the prop rod bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

  3. Remove the temporary hood support.
scientia non olet · About LEMON Manuals