LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Hinge Replacement >> Removal Procedure

Removal Procedure

  1. Remove the hood. Refer to Hood Replacement .
  2. Remove the front fender. Refer to Front Fender Replacement .
    3. Fig 1: View Of Hood Hinges
    GM1313590Courtesy of GENERAL MOTORS CORP.
  3. Using a grease pencil or other suitable marking device, mark the location of the hinges to the body.
  4. Remove the bolts that retain the hinges.
  5. Remove the hinges from the body.
scientia non olet · About LEMON Manuals