LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Hinge Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Hood Hinges
    GM1313590Courtesy of GENERAL MOTORS CORP.
  1. Position the hinges to the body as previously marked.
    2. NOTE: Refer to Fastener Notice.
  2. Install the bolts that retain the hinges to the body.

    Tighten:  Tighten the bolts to 25 N.m (18 lb ft).

  3. Install the front fender. Refer to Front Fender Replacement .
  4. Install the hood. Refer to Hood Replacement .
scientia non olet · About LEMON Manuals