LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Endgate Lower Hinge Replacement - Endgate Side >> Removal Procedure

Removal Procedure

    Fig 1: View Of Lower Endgate Hinge
    GM1245771Courtesy of GENERAL MOTORS CORP.
  1. Remove the endgate from the vehicle. Refer to EndGate Replacement .
  2. Remove the bolts retaining the endgate hinge to the endgate.
  3. Remove the endgate hinge from the endgate.
scientia non olet · About LEMON Manuals