Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install the endgate hinge to the endgate. Refer to Endgate Lower Hinge Replacement - Endgate Side .
- Install the endgate latch assemblies. Refer to Endgate Latch and Cable Assembly Replacement
.
- Install the endgate handle. Refer to Handle Replacement - Endgate
.
- Install the endgate cover. Refer to Pickup Box Endgate Latch Cover Replacement
.
- With the aid of an assistant, slide the endgate hinge onto the left side body side hinge.
Courtesy of GENERAL MOTORS CORP.
- Install the endgate to the right body side hinge by holding the endgate at a 45 degree angle and lowering the endgate hinge (2) onto the body side hinge (1).
Courtesy of GENERAL MOTORS CORP.
- Install the support cables (1) onto the endgate striker bolt heads by inserting the keyhole slots over the bolt head and sliding the cable rearward.
- Close the endgate.