LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Accessory Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Accessory Switch
    GM1251642Courtesy of GENERAL MOTORS CORP.
  1. Install the switch to the trim plate.
  2. Fig 2: View Of Accessory Switch Fasteners
    GM1251712Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  3. Install the fasteners retaining the switch to the trim plate.

    Tighten:  Tighten the fastener to 2.5 N.m (22 lb in).

  4. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement .