DIC Displays

The driver information center (DIC) parameters are displayed by order of priority as follows (from highest to lowest):

• Service Diagnostics
• Feature Programming
• Driver Warnings
• Vehicle Information

Vehicle Information 

Vehicle information provides feedback to the driver on vehicle performance, mileage, maintenance, or related information.

Vehicle information can only be displayed with the engine OFF and the ignition in the ON position.

When the English/Metric status changes, any applicable vehicle information data values will also change.

DIC Trip Information/Reset Capabilities 

The available DIC Trip Information and reset capabilities are as follows:

• Odometer-Cannot be reset
• Trip Odometer-Can be reset

Odometer 

The odometer is capable of displaying values from 0-999,999 KM or MI. If the ignition is in the OFF or UNLOCK/ACC position, the odometer can be displayed by pressing the trip/reset switch. The odometer will remain displayed for 5 seconds.

Trip Odometers 

The trip odometer is capable of displaying values from 0-9999.9 KM or MI.

When the maximum value is reached, the trip odometer will roll over to 0.0.

Holding the control stem for greater than 4 seconds while the trip odometer is displayed will reset the displayed trip odometer to 0.0 upon release of the stem. The trip odometer will remain displayed after being reset.

Engine Oil Life 

Engine Oil Life percentage values are based on class 2 messages to the instrument panel cluster (IPC). The IPC requests this value when Engine Oil Life is selected on the DIC.

Engine Oil Life is capable of displaying values from 0 to 100%.

Pressing the control stem for longer than 2 seconds while Engine Oil Life is displayed on the DIC will reset the value to 100%. An audible warning will sound confirming that the system has been reset.

Display appears as OIL LIFE: XXX%.