LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2) >> Repair Instructions >> Repair Instructions - On Vehicle >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Transmission Support
    GM1235550Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support the transmission with a transmission jack.
  3. Remove the 2 nuts securing the transmission mount to the transmission support.
  4. Raise the transmission off of the transmission support.
  5. Fig 2: View Of Transmission Mount
    GM1201366Courtesy of GENERAL MOTORS CORP.
  6. Remove the bolts. Raise the transmission just enough to remove the transmission mount from the vehicle.