LEMON Manuals: Even more car manuals for everyone

Home >> Isuzu >> 2007 >> i-290 LS, Automatic >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 4L60-E/4L65-E/4L70-E - Introduction (2 Of 2) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Turbine Shaft O-Ring Removal

Turbine Shaft O-Ring Removal

Fig 1: Identifying Turbine Shaft O-Ring

GM7634

Courtesy of GENERAL MOTORS CORP.

Remove the O-ring (618) from the turbine shaft. O-Ring location is model dependent.

scientia non olet · About LEMON Manuals